Step 1

Power Switch:  Use this switch to turn the projector on and off.

Step 2

Projector Foot:  Use this dial to raise or lower the projector foot in order to position the image on the screen.

Step 3

Focus Knob:  Turn this knob to focus the image on the screen.

Step 4

Advance/Reverse Buttons:  Use these buttons to advance or reverse your slides.

Step 5

Slide Tray Manual Release:  In order to remove your slide tray, you must advance all the way back/forward to the first slide. To remove the tray without returning to the first slide, press the silver manual release lever and gently lift the tray up.

Step 6

Remote Control Jack:  The remote control must be plugged into the back of the projector before you can use it to advance and/or reverse your slides.

*Please notify the Help Desk at x1112 when the bulb burns out so that it can be replaced immediately.